Zipp makes the impossible possible with their 303 Firecrest Carbon Disc Brake wheels—they're equally at home on the flats as they are in the mountains. The 45mm-deep rims slice through the wind more efficiently than even many deep-section wheels thanks to their 28.5mm-wide dimpled rims. And, by creating a seamless junction between rim and tire, the increased width further reduces drag. The 303s climb with the best and re-accelerate out of corners like rockets since they barely register on the scale, which makes them a must-have on undulating terrain. The extra wide rim also allows running wider tires at lower pressures with less fear of pinch flatting, which boosts ride quality and comfort and reduces rolling resistance. Plus, Zipp's 77D/177D disc hubs gives you incredible stopping power in wet and dry conditions alike, and they're thru-axle compatible (sold separately) for jaw-dropping steering precision and power transfer. You also get Sapim's oustanding CX-Ray spokes.
Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Front Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability.
Full-carbon, 50mm deep tubeless-ready disc brake wheel that perfectly balances durability, weight, and aerodynamics. Proven, tested design for the perfect upgrade There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 5 TLR is a full carbon, tubeless-ready disc brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. We started with a proven 50mm-depth shape and added the versatility of disc brake hubs to make a carbon road wheel available to all. Product details - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, stiffness, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - 50mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, axle swap kit available for quick release and 15mm - Includes TLR rim strip, TLR valve, valve core removal tool, and traditional rim strip
• Strong Custom Strider Rim • Durable No-Flat Tire • Tread pattern and bearings matches the ST-4, and will fit on any ST-Model
Kids wearing out their Strider? That's a good thing! Upgrade their out-of-doors adventures with these aluminum wheels. These lightweight 12-inch wheels are a great upgrade for trail riding and come with tires and tubes.
Whether you're touring, building the ultimate commuter or just want excellent stopping power on the road, Bontrager's Select Disc Road Rear Wheel is a sweet choice. Free speed will be yours thanks to the low-profile aero rim and 24 spokes that aren't afraid of rough roads. Plus, the hub is easily serviced and features polished, ground bearing races, a forged shell and a chromoly axle for top-notch durability. And the 130mm and 135mm Over Locknut Dimension (OLD) hub options makes these wheels usable on both your road or cyclocross frames.
Slice through the wind on Roval's Rapide CLX 40 Wheelset. They feature 40mm-tall aero carbon rims, and DT Swiss Revolution straight-pull spokes laced to sealed ceramic cartridge bearings Roval hubs. The rear hub is adorned with DT Swiss's renowned 240 star ratchet internals. The wide, carbon rim provides a round tire profile and greater lateral stiffness for precise handling. This feathery, 1240-gram wheelset spins up with ease so you can bolt out of corners and breeze up the climbs. With your favorite tubular tires, these wheels roll as smooth as silk.
Traverse means to ride up, across and down, which is exactly what Roval's Traverse Fattie 29 Wheelset does best. Made with tough Specialized E5 aluminum rims laced with pro-level DT Swiss spokes and nipples, these wheels are a sure fire way to supercharge your trail riding. The 29mm internal rim width supports tire sidewalls better for increased volume, allowing lower pressures, more grip, less air burping, and a ride that feels like your bike gained an extra inch of travel. You can run them with or without tubes and the front hub is compatible with 20mm or 15mm through-axles. The rear hub, replete with DT Swiss 360 internals, comes with end caps for a 135mm quick release or a 12x142mm through axle.
The new Flow MK3 is wider, stronger, and lighter. The Flow’s legendary history on the World Cup DH circuit, combined with WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer and more durable, the new alloy is also even lighter, putting the new Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include: pre-installed tape for tubeless use and presta valve; 15x100mm front wheels include quick-release end caps and quick release. - 29mm internal width for tires up to 2.8-inches - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Even lighter than the Flow EX - Laterally stiffer and stronger for improved handling - 25% stiffer and stronger for improved handling - More durable rim shape and alloy - Neo hubs accelerate quicker and last longer - Built on the proven success of the Flow EX on the World Cup DH circuit - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
$503.00 - $720.00
The new 22.5mm-wide Cross Country specific XR 1501 SPLINE ONE comes with all the advancements of a modern cross country rim, only at 2.5mm more width, providing more air volume for the same size tire which creates more traction and comfort. The asymmetric rim further improves spoke angles, making the wheel even stiffer, more precise handling, and more responsive. The specially developed process for surface hardening and the gentle anodizing result in an unsurpassed surface durability at no additional weight.
$1,079.00 - $1,501.00
Unsure what will happen on your group ride? Mountains, hills, or flat sections? Water from below, water from above? You needn't worry — the PRC 1400 SPLINE 35 has it covered. High-end bladed straight pull spokes and the most reliable and lightweight freewheel system make for an efficient ride. Offering the perfect blend of comfort, grip, and low weight in combination with a higher volume tire, the wide and stiff full carbon rims accelerate with the best of them.
$3,255.00 - $3,325.00
In order to answer the call from Nairo Quintana and the other champions, Campagnolo created the Bora Ultra 35: perhaps the best wheel out there in terms of performance both while climbing and on mixed routes. The Bora Ultra's innovative AC3 (All Conditions Carbon Control) Technology means maximum safety when braking in any condition, providing shorter stopping distances and excellent braking modulation. And, thanks to its wide, aerodynamic profile, differentiated hub diameter, and CULT bearings, all cyclists can now enjoy the same performance Campagnolo provides its Pro-Tour champions. - 35mm carbon profile offers maximum lightness and aerodynamics - Designed for domination uphill and on the flats - CULT bearings deliver up to nine times the smoothness of standard bearings and are designed to resist oxidation, preserve performance over time - Carbon rim and hubs ensure good stiffness and extremely low weight - Aerodynamic profile spokes slice through the air - Exclusive G3 spokes ensure better balancing of the traction force on the wheel, drastically reducing all its stress - Weight: 1,360 grams
Innovating the wheel that for years has been a market benchmark might have seemed difficult and risky, but the Campy Tech Lab designers have managed to maintain those characteristics of flexibility and ease of handling that have made this high-profile wheel easy to steer, high performing and safe. The Bora Ultra 50 bursts onto the market not only with introduction of the new tire bed dedicated to the clincher, but also with improvements to the previous version in terms of lightness, aerodynamics, stiffness and comfort thanks to use of the new wider rim and front and rear hubs with different diameters. The 2018 range sees the addition of the new AC3 (All Conditions Carbon Control) Technology braking track, which brings braking safety on wet terrain closer to that on dry. Plus, extremely clean-cut aesthetics guaranteed by innovative water-transfer graphics. All without giving up on the extreme smoothness, which has become the market benchmark and is the result of use of CULT bearings. - 50mm Full Carbon rim guarantees the best quality available on the market - Long-lasting smoothness is ensured by CULT bearings, nine times better performing than a standard solution - Internationally one-of-a-kind AC3 technology guarantees unique performance by the Bora Ultra 50 also when braking - Excellent grip between brake pad and rim allows for gradual, constant braking and shorter stopping distances, even in wet conditions - Dedicated brake pads (red compound) guarantee reliability and durability - Aerodynamic spokes, wider profile, carbon hubs, CULT bearings, self-locking aluminum nipples, oversize flanges and much more - The distinctive G3 design of the rear wheel guarantees excellent stiffness and an unmistakable look - Weight: 1,435 grams
WeThePeople took their bombproof Supreme front hub, added nylon hub guards, and then laced it up to their wide and rugged Logic rim to make one tough-as-nails wheel, ready to go, straight out of the box. - 14mm hollow/hardened heat treated Chromoly axle - 10mm female bolts - Includes nylon rim tape - Includes a second set of cones for use without hub guards
- High performance Wheelset with internal vibration damping, ideal for DH and Freeride. - Unique profile with low sectional profile height and wide width, which adds radial compliance, while keeping high lateral stiffness. - Improved radial compliance for better traction over bumps and chatter, while reducing negative feedback to the rider. Performance and comfort enhanced. - Vibrocore inner well, reduces the transmission of harmful vibration frequencies, meaning less vibration for the suspension and rider, also increasing the fatigue life of the rim. - 30mm internal width extremely versatile, fitting tires from 2.0” to 2.6” perfectly, and even allowing + size tire use, without negative squaring off of tire profiles.
This wheel is the future of gravity riding and racing. It's ride-optimized, incredibly strong, and debuts the most effective and lightest anti-flat system on the market (ENVE's patent-pending Protective Rim Strip). These wheels will give downhill-oriented riders a new freedom to set their tire pressure for cornering and rock garden stability without sacrificing their confidence to smash track speeds. Who It's For Gravity junkies, Enduro racers, and hard-charging trail riders will find enlightenment riding the M7 Series. A completely new shape and design that massively reduces the risk of pinch flatting and/or damaging the carbon, the M7 Series provides the confidence to ride without limitations. Why We Made It Enduro runs on two things – Confidence and Control. Nothing ruins a good shred fest like a flat tire or broken rim, and nothing spooks you on a dusty trail like an unexpected drift. With this in mind, we have been hard at work over the past 2 years to develop a carbon wheel system that will allow ourselves, athletes, and most importantly – you – to go "full-send" without compromising the ride experience by running high tire pressures, DH tires, and heavy pinch flat reduction inserts. Building upon the platform of the M7 Series' predecessor the M70, we re-profiled the rim to mate up with modern tires and to absorb trail vibrations and chatter. However, just fitting tires is not enough. We know that riders also want the freedom to run lower pressure and that doing so can introduce flat tires and damaged rims. The ENVE solution is a new rim shape paired with ENVE's patent-pending, energy-absorbing Protective Rim Strip. With this technology, riders can skip the inserts and run the tires and pressures they want. Amazingly, we've managed to keep the weight neutral and improve impact resistance too.
$201.00 - $278.00
Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Baron S1 Wheelset - Use: Plus Tire Performance, Adventure, and Trail - Internal Rim Width: 35mm - Optimal Tire Size: 2.8 to 3.2-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock - Brass Silver Nipples - Wheel Sizes and Weights: 26-inch (1,998g), 27.5-inch (2,060g), and 29-inch (2,162g)
The Flow's legendary history on the World Cup DH circuit, combined with Stan's WideRight 29mm internal width offers the perfect balance of tire stability for outstanding control at any speed. Genuine Bead Socket Technology rolls faster, corners harder, and withstands even bigger hits. Combined with a new shape, the Flow MK3 is born and bred for control at speed and perfect for technical trails and enduro racing. Laterally stiffer, more durable and more lightweight than previous versions, Flow MK3 in a class by itself for all-mountain performance. Flow MK3 wheels include pre-installed tape for tubeless use and Presta valve; 12x142mm rear wheels also include quick-release end caps and quick release. - Tubeless ready with rim tape and valves installed - 29mm internal width for tires up to 2.8" - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats. - More durable rim shape and alloy Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for 2.35"-2.80" Trail and All-mountain tires
Designed with input from Stan's Enduro World Series teams, the Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25" to 2.5" tires, Stan's expanded the internal width to 26mm while keeping the rim incredibly light. The 27.5" Arch MK3 rim weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan's NoTubes rims. - Tubeless ready with rim tape and valves installed - The perfect balance of strength and weight 24% wider than the Arch EX for improved stability with larger tires - Same low weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Stan's Neo 6-pawl, 36-point disc hubs feature a 10-degree engagement - Most trusted tubeless system for easy setup and low maintenance - Sapim Secure Lock aluminum nipples - WideRight optimized for 2.25"-2.50" Trail tires
Designed for today's wider tires, the Sentry MK3's patented low-profile sidewall and lightweight 6069 alloy construction delivers width without the weight. Stan's patented BST rim design allows a tire to expand to its full volume without distorting its shape, and the 32mm internal width of the Sentry MK3 is more stable with 2.50"-3.00" tires. The result is less rolling resistance, more traction, and incredible handling. The Sentry MK3 wheels are a great upgrade for anyone looking for the traction and control needed to take on even the most difficult trails. Stan's updated Neo hub includes a stronger axle and reliable Durasync six pawl freehubs. The Sentry MK3 proves wider can mean faster. Sentry MK3 wheels include pre-installed tape for tubeless use and presta valve. - Patented BST design for the easiest and most reliable tubeless - 32mm internal width for stability with wider tires - Gradual taper rim shape and 6069 alloy is lighter, stiffer, and stronger Neo hubs accelerate quicker and last longer - Most trusted tubeless system for easy setup and low maintenance - Sapim Force spokes and Sapim Secure Lock aluminum nipples - WideRight optimized for 2.50"-3.00" Trail tires
$223.00 - $289.00
At the core of this all-around wheelset lies a modern, wide, and light aluminium rim. Being the foundation of the wheel, it makes for a balanced width-to-stiffness-to-weight ratio. This rim is complemented by a hub featuring DT Swiss' proven pawl system freewheel as well as a high end build with bladed spokes and elaborate alloy nipples. These features make it a premium training wheel easily able to race your mates when the city limit sign comes up.
Campagnolo has developed a totally reworked disc brake version of the Bora One that transfers skills and knowledge gained in years of experience and introduces a new logic and innovative technologies to ensure unprecedented results. The Bora One Disc Brake is the most sophisticated carbon wheel on the market and one of the few specifically designed for disc brake systems. It is extremely light yet stiff, resistant to shock and perfectly balanced: a versatile wheel for any kind of route. - Use of resins and materials that guarantee superior finish and good UV resistance - Designed specifically for disc brake systems - Lightweight uphill thanks to its 35mm rim - Smooth and safe downhill thanks to its USB bearings - The layers of carbon are hand positioned to ensure the perfect equilibrium of weight and performance - Monolithic aluminum hubs optimize disc braking torque - Weight: 1483 grams
Being a company of mountain bikers, when Race Face set out to design a new wheel, their goal was simple, "Make the wheel we want to ride." HUB - Large oversized flange for improved bracing angle - Larger bearings - No bearing adjuster - Wider bearing stance - 6 double tooth pawls (3 engage at a time) - 120 points of engagement (3 degrees) - Each pawl has its own spring - Balanced spoke counter bore - Tool-free interchangeable end caps (sold separately) RIM - 30mm Internal width tubeless ready rim - 4.5mm Offset – Improves spoke balance and wheel stiffness - New stronger alloy for highest impact resistance of any Race Face or Easton rim - High gloss black water transfer logos
$361.00 - $532.00
Just wide enough, just light enough. At 30mm internal rim width the M 1700 SPLINE 30 works for tires ranging from slightly wide to quite wide, allowing it to attack the hardest terrain. But with a high-end build, butted spokes, patented alloy Pro Lock nipples and the benchmark Ratchet System hubs, it still comes in at a low weight. Low weight means it's very reactive to rider input. Reactive means fun, and fun is why we are all doing this, right?
$488.00 - $592.00
Big tires and wide rims normally mean heavy wheels. But not with DT's BR 2250s! Nearly as light as standard wheels and with the footprint only fatties can offer, this wheelset turns any fat bike into a fun-machine!
$209.99 - $289.99
A new method of attacking the trail is on the horizon and about to take the mountain bike community by storm. PLUS SIZED 3.0 tires provide faster acceleration combined with increased tire patch for superior traction and added cushion. Introducing the SUNringlé Mulefüt 50! PRODUCT SPECS: - STR SUNringle Tubeless Ready - 50mm rim width - Premium cartridge bearing straight pull hubs - Quick release front axle 100x15 and 110x15 - Rear axle options: 142x12, 148x12 - Wheelsmith straight pull double butted spokes - Wheelsmith brass nipples - 32 hole count - Weight / Set: 2220g (27.5") 2310g (29")
The name Crossmax is synonymous with XC riding and racing. This new tubeless-ready wheel boasts many of the same features and technologies as premium XC race wheels, but at a more attainable price. One of the key factors is Mavic's UST technology, which allows for easy setup of tubeless ready tires and gives you all the associated benefits including better traction and control, a smoother ride quality and a reduced risk of punctures. The new rim design features a 22mm internal width with a hookless profile. The wheels are built with 24 straight-pull spokes to save weight and maximize wheel strength, so you get just the right balance of efficiency and durability. Power transfer is handled by Mavic's TS-2 freehub, which is compatible with all common axle standards. It’s available in Boost or Non-Boost hub widths and can be used with quick-release or thru-axle setups with optional adaptors.
The best price on the market for a wheel meant to be ridden. Single-wall rims and loose-ball hubs that come out of the box round and true.
$950.00 - $1,150.00
The Zipp 202 Firecrest Carbon Clincher retains a classic 32mm rim depth, but with a sturdier 25.4mm rim width for all-around use. This legendary climber's companion weighs just 1,450g, and features Sapim CX Sprint spokes to optimize torsional and lateral stiffness. Laced to the maintenance-free Zipp 77/177 hubset, you can count on best-in-class durability no matter where you decide to ride. Confident stopping power comes from a combination of heat-resistant resin used in the 202's construction and Tangente Platinum Pro Evoke brake pads that provide all-conditions reliability. Zipp includes an integrated valve extender with valve-core wrench, rim tape, and quick release.
Page 1 of 16 Next page