Rims

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • ERD: 534 • Width: 80mm • Depth: 24.5 • Weight: 1,310 grams (32-hole), 1,294 grams (36-hole)

One of the most celebrated rims in the history of road cycling, Mavic’s Open Pro remains the example to which high-end aluminum road rims are compared. Its design is tried and true, and its Maxtal material delivers a perfectly balanced strong, rigid, and lightweight wheel build. It also features Mavic’s Soudé Usiné Process (SUP), a process by which the rim is arc welded and machined smooth, resulting in a stronger rim joint and better rim balance, as well as smooth, shudder-free braking. Ride a pair of Open Pros and you’ll understand why so many experienced riders swear by them. - Clincher

- To be used exclusively with Bontrager 29""/700c Tubeless Ready (TLR) wheels - TLR Rim Strips are the light and easy solution to Bontrager Tubeless conversion - Rim Strip replacement is recommended if removed from the wheel

After a red nose, one of the most identifiable traits of a clown is his footwear. They're huge. So are Surly's Clown Shoe rims. At 100mm wide they greatly increase the tire footprint and give you more stability and float in loose terrain. The material between the spokes is drilled out to reduce weight and 64 spoke holes let you build them up centered or offset.

65mm wide like Large Marge, Marge Lite shaves a lot of weight over regular Marges while retaining torsional stiffness. This rim, like Surly's Rolling Darryl and Clown Shoe rims, utilizes a 64 dual-spoke hole pattern. Lace 32 holes all on one side when building for frames with offset, such as our Pugsley and Moonlander. Lace 32 holes skipping side to side for non-offset frames or forks. - Wheel Size: 26 - Hub Compatibility: 32h hubs - ETRTO*: 559mm - Weight: 690g *Tire bead seat diameter

My Other Brother Darryl is a single-wall constructed, 80mm wide rim. 80mm wide rims give you a bigger footprint than that of narrower rims, which means more floatation and more traction. To initiate tubeless sequence, you just need a no-stretch rim strip and bead-to-bead tubeless rim tape. My Other Brother Darryl comes with either a 32 hole, symmetric wheel lacing spoke hole pattern or the tried and true 64 dual spoke hole pattern that allows for symmetric or offset wheelbuilds. It's got plenty of cutouts to keep the weight down and help your tires float through the squishiest of terrain. - Wheel Size: 26 - Hub Compatibility: 32h - ETRTO*: 559mm - Weight: 710g (Symmetric) 740g (Dual) - Color: Black or polished silver *Tire bead seat diameter.

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires

Now you can add traction and stability to your ride without sacrificing speed. SPANK Industries is a longtime leader in the development of wide rim technology. The SPIKE Race 33 Rim is the evolution of SPANK’s infamous SPIKE Race rim line up. With a 28mm inner profile, the SPIKE Race 33 combines the wide stance of its predecessor the SPIKE 35 EVO, with the light weight of SPANK’s legendary Race 28. The Race 33 was designed to optimize tire spread across a wider array of tires options, without squaring off tire profiles, making it ideal for anyone in need of enhanced traction and stability without compromising speed on track. Sturdy Dynamal alloy construction paired with SPANK’s acclaimed OohBah rim design, make the SPIKE Race 33 one of the strongest alloy hoops on the market. Equipped with SPANK’s patented Bead Bite anti-burp tubeless system, the SPIKE Race 33 offers unmatched tire security and performance with or without tubes. - Key Tech: Bead Bite, OohBah, Dynamal Alloy - ERD (mm++): 529 (26") / 554 (27.5") - ETRTO (mm): 559x28 (26") / 584x28 (27.5") - Discipline: Race / Freeride

Surly's 50mm wide Rabbit Hole Rim lets you build a wheel that accepts a tire with a large footprint for outstanding control, and traction. This anodized-aluminum hoop has 64 spoke holes and can be built centered or offset. Also, material has been removed everywhere possible (without affecting strength) to keep the rim as light as possible for quick acceleration.

If the Ribcage is too rich for your blood, the Rollcage is its more affordable sibling. Using the same proven shape and cross-over-lacing to create a really strong wheel, but industry standard 6061-T6 alloy and no ribs drops the price considerably. While the Rollcage is the lesser expensive, it is still an excellent rim, with the same super tough sidewall and bead profile its the lightest rim we make at 450 grams. You will recognize the rims by their outer shape, but the Rollcage is actually 2mm narrower and easily identified by the groove in the middle of the inner wall. We offer rims in HARD anodized finishes rather than the decorative anodizing used by most companies. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 450g / 15.9oz - Weight (Chrome Plate): 490g / 17.3oz - Width: 34mm ERD: 389mm

Designed with input from Stan's Enduro World Series teams, the new Arch MK3 is ready to own every trail. WideRight optimized for maximum stability with 2.25-inch to 2.5-inch tires, Stan's expanded the internal width out to 26mm while keeping the rim incredibly light. The 27.5-inch Arch MK3 weighs only 425g. A new proprietary alloy and stronger, low-profile rim shape means the new Arch MK3 is built to last. Featuring Bead Socket Technology, the new Arch MK3 also offers the unmatched traction, control, and reliability only found on genuine Stan’s NoTubes rims. - The perfect balance of strength and weight - 24% wider than the Arch EX for improved stability with larger tires - Same light weight as the Arch EX - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - 25% stiffer and stronger for improved handling - Lighter and more durable rim shape and alloy - Most trusted tubeless system for easy setup and low maintenance - WideRight optimized for Trail tires

Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.

Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.

The Ribcage has been one of the only rims to have true design breakthroughs in the last few years, since its introduction the competition has scrambled to catch up but still remain a poor copy, so if it doesnt say G-Sport on the rim, don't expect it to perform like a G-Sport rim. The Ribcage is a light weight rim that can take anything you throw at it. With the ribcage the spoke holes are re-enforced with patented ribs that support the sides of each spoke nipple and eliminate the possibility of nipple pull through under even the highest loads. The rim also features cross-over-spoke lacing, where each spoke goes from one side of the hub to the opposite side of the rim for an increased angle and therefore increased lateral strength. The outer walls are extra thick to protect against case dents, while the other walls are extra thin to keep it light. The entire design revolves around the use of a proprietary high strength aluminum alloy made specially for us in an on-site foundry . At 500 grams, the strength to weight ratio of the Ribcage cannot be matched. The 36mm width and 18mm height are also major factors in the design, spreading out the impacts and maximizing resistance to pinch puncturing. GSport offers rims in HARD anodized finishes rather than the decorative anodizing used by most companies. All of these advantages create the premier rim, but do effect the cost. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 and 48 - Weight (Hard Anodised): 500g /17.6oz - Weight (Chrome Plate): 540g / 19oz - Width: 36mm ERD: 389

Someone said a few years ago that there was nothing new left to do with BMX rims, yet since then GSport has gone on to do quite a lot of new stuff, and here’s an example of the latest. At first glance the Birdcage looks like a fairly conventional “aero” style rim, but there is more to it than that. The first clue comes from the name; birds have hollow bones to save weight whilst retaining as much strength as possible, and the Birdcage rim has a hollow bead for the same reason. The rim’s hollow bead is still big and chunky to help reduce the chances of pinch puncturing or flat spotting the rim, but by creating a tiny hollow cavity inside it GSport can also keep the weight right down. The next innovation was to adapt their cross-lacing design to the narrow inner wall of the rim. They managed to squeeze a few extra millimeters of spoke offset out of the design to help increase lateral wheel strength, and by carefully tailoring the rim’s cross-section we managed to match all the angles to the nipple so that the walls of the rim section act like the ribs inside the Ribcage rim, which helps to support the spoke nipples as much as possible. Traditionally, the greatest flaw in “aero” rims has been the valve hole. “Aero” rims position a lot of very efficiently utilized mass in the base of the rim to support the spokes and give the rim good strength, then a huge hole is drilled through it for the valve stem and a massive weak-spot is created. With the Birdcage GSport has offset the valve hole so that this section can retain its strength. A handy side-effect of this is that fitting a pump is now more convenient. Aside from these original features, GSport spent a lot of time “sweating the small stuff”. They’ve ensured that the deep center allows for easy tire removal and fitting, and they've made sure that the sidewalls, while slimmed down, are still suitable for brake use. The end result is one of their most high tech rims to date. With a weight of just 408g (14.4oz) it outperforms most rims weighing 20-30% more, and the weight saving from the rotational mass of the wheel feels fantastic. TECHNICAL SPECIFICATIONS - Sizes: 20" Only - Drillings: 36 hole - Weight: 408g / 14.4oz - Width: 34mm ERD: 383mm

Whisky Parts Co. is at it again—pushing the category forward with the carbon No. 9 Rim. Far from just another wide, lightweight rim offering flotation and stability, No.9 sets the new standard for durability and tubeless reliability with hookless sidewalls and Whisky's new TBLS bead profile. These design features create a stronger and stiffer sidewall with more impact resistance, while making tubeless set-up simple. The proprietary shape and layup result is torsionally stiffer than single wall carbon offerings. These will have you rolling for years to come. - Engineered for disc brake only - Matte unidirectional carbon finish - 6k internal carbon fiber weave at spoke bed - Designed to be used with spoke washers - 30psi max tire pressure - Max tire is 3.8" - Rider weight limit: 300lbs

Trail riders, fatbike racers, and ultra-endurance athletes looking to add a refined, lightweight, tubeless wheelset to their fat bikes need look no further than Whisky's No.9 70w rim. While it’s optimized for use with 3.8–4.6-inch tires, it’s compatible with tires up to 5.05-inches wide. It utilizes a double-wall construction to ensure a sturdy, stout rim profile that maximizes cornering stability. With an inner width of 65mm, fat tires mimic the look and feel of traditional mountain bike tires when mounted to the 70w. That combo offers unmatched trail-attacking traction with a confidence-boosting wide footprint, making it one of the most versatile fat rims on the market.

Whisky's 80w rims offer 27.5inch fatbike users a light weight, easily tubeless platform. They help maximize the inherent rollover and longer contact patch 27.5-inch fat tires offer, while combating the weight penalty a larger diameter alloy rim can exhibit. True to form as their other rims, Whisky's TBLS beads offer secure tire performance at low pressures.

Whisky's No.9 100w rim has a 94.5mm inner width to maximize the footprint of fat tires up to 5.05-inches wide. Its double-wall construction makes it a unique, one-of-a-kind carbon fat rim. It supports the structure of the tire’s sidewall for a stable, traction-laden ride while simultaneously improving your float on snow and sand. If you’re looking for the best in winter traction, the No.9 100w has you covered.

The original 7000 series aluminum BMX rim. This specialty grade of aluminum lets Odyssey produce a rim that is both lightweight and strong. The Seven-KA is a proven, go-to rim for pro-level riders worldwide. SPECS - 7000 series aluminum - Width: 34mm - Height: 17mm ERD: 390mm

- 42mm DEEP DISH sleeved and pinned rim - Powder coated (PC) or Anodized finish(Ano) dependent on color - Available with Machined or Non-Machined sidewall - 760g

Origin-8's DNZ18 is a lightweight 700 x 22c aero aluminum clincher rim. It has machined sidewalls for great braking and the spoke holes are reinforced with eyelets for durability.

• Size: 26 x 4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 60mm • Depth: 24.5

• Size: 26x4.0 • Single wall construction • Non-machined sidewall • Color: Black • Drilling: 32 • ERD: 536 • Width: 80mm • Depth: 24.5 • Weight: 1,061 grams

• Size: 26 x 4.0 • ISO: 559 • Double Wall Construction • Non-machined Side Wall • Color: Black • Drill: 36 • Weight: 1,579 grams • Width: 100mm • Rim depth: 29.5mm

• Size: 26 x 4.0 • Double wall construction • Non-machined sidewall • Color: Black • Drilling: 32 or 36 • Width: 65mm • Depth: 21mm

The Aerospace features an “aero” or “V-shaped” cross-section, which creates a unique structural design. Made from 6000 series aluminum, it’s both easy to manufacture, incredibly durable and allows us to create a rim that’s strong, light and affordable. Thick inner sidewalls, and a lowered center wall section provide more room when installing or removing tires, and running brakes isn’t an issue. The Aerospace uses a traditional lacing pattern, just like the HAZARD LITE, SEVEN K-A and QUADRANT. FEATURES - Precision welded joint 6000 series aluminum SPECS - Width: 34mm - Height: 23mm - ERD: 380mm - 36-hole - 450 grams (15.8oz)

- AL6061-T6 alloy construction - Post-production anodized in a sanded gloss black finish - Tubeless ready - Disc brake only - Pinned joint - ISO-Mountain certified - ISO: 559 - Width ID: 84 - Width OD: 90 - Profile: 14 - Wall: Sgl - Side: Disc - Valve: PV - Weight: 750g - ERD: 549 - Tire Compatibility: Tubeless Compatible

Stan's ZTR Alpha 340 Rim lets you enjoy the advantages of a tubeless setup on your road and cyclocross bikes. At only 350 grams, it's light, strong, and it features a semi-aero profile for quick accelerations and blazing speed. The Alpha rim also uses Stan's BST technology for easy tubeless conversions, while its wide inner profile and lowered sidewalls boost tire volume for enhanced traction.