The original Blackburn cage design. - Welded aluminum for lightness and strength - Aluminum construction - Budget-friendly - 47 grams
Profile's Stryke Kage ensures you’ll never lose your bottle again. Constructed of injection-molded nylon/fiberglass, this incredibly strong cage provides a great grip and doesn’t leave marks on bottles. Plus, this cage is super light, too.
Profile Design's Razor 2 Bottle System consists of their featherweight Profile carbon Kage and their 20-ounce Razor aero bottle. Adding this aero beauty to a triathlon or time trial bike is one of the best, easiest and most affordable ways to streamline your machine more for additional free speed. It fits nicely on road bikes, and improves the aerodynamics there, too.
Profile Design's Aerodrink Base Bar Bracket is the perfect holder for your Profile Aerodrink bottle. It weighs next to nothing and is built tough to firmly hold bottles and last for years of training and racing. It attaches quickly and easily to all Profile, and most other base handlebars (base bars and bottles sold separately).
Profile's Axis Karbon Kage is kutting edge! Tipping the scales at just 33 grams, this is one of the lightest cages available. And, the carbon’s fine grip prevents bottle launch no matter where you mount the Kage. Plus, it adds a sweet look to your prized ride!
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Blackburn's Tallboy Cage says: Why not keep ‘em cold while on your weekly group ride. Transport your refreshments in luxury with this purpose-built cage. - Keep your 16oz cans cold and secure inside the custom Blackburn Koozie - Extra thirsty? No problem: skip the Koozie and direct mount a 24oz can - Durable, proven, stainless-steel construction - Also compatible with standard water bottles - Includes 16oz Blackburn Koozie - 88g, including Koozie
This is the rebirth of Blackburn's successful Camber Cage. Built tough to withstand MTB abuse, yet elegant enough to pop on your road bike, the Camber Cage pulls double duty, and looks good doing it. - Different color and finish options lets you pick a cage to match your bike - UD Carbon layup provides a smooth finish that reflects current carbon frame designs - “Rib cage” retention design hugs your bottles securely - Flared top opening assists with aligning your bottle to the cage while on the fly - 30 grams
The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).
Blackburn's Carbon Cinch Cage embodies an elegant and sleek design that has a firm grip to keep your bottles cinched down. - UD Carbon Fiber - Uni-Directional carbon fiber material allows for maximum strength, and minimal material for ultimate weight savings - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Black Matte is the lightest color/finish combination. Weight may vary up to 3 grams between other colors/finishes. - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 78mm/3.07in - Height 78mm/3.07in - Weight-16g/0.04lbs
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
The flat Ortlieb coffee filter holder is both ideal and practical for travel, hiking, and camping. It is not a substitute for the filter paper, but rather an alternative to traditional, bulky, hard plastic cones which take up a lot of space. Includes 5 paper filters. Simple to use: Position the Coffee Filter over the pot or cup using wooden sticks, tent pegs or cutlery which fit through the side mounted sleeves, insert filter paper size 4, spoon the coffee, pour in water and enjoy your coffee.
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
Keep your tube close and hydration on-tap with the Magnetic Tube Trap.
- Self-adjusting elastomer to improve bottle retention - Made with high-impact composite material
XLAB's Mezzo Cage Pod is a screw-top holder for your on-the-road tools and spares that fits in your bottle cage. It's convenient to move from bike to bike, it protects your gear, and it includes a fleece bag so the contents in the pod don't rattle and make noise inside. The pod is 750ml capacity to hold a spare tube, levers, CO2 inflator and multi-tool.
The Kinetic Twenty20 Bottle Cage ergonomically improves the simple act of grabbing a drink on the bike. A natural arm motion removes and replaces a bottle at an angle of approximately 20 degrees off-center. The Twenty20 Bottle Cage can be mounted on a bike frame at a 20-degree offset left or right, allowing bottle insertion into the center of the cage, rather than in from the side.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
Carry your gear tucked out of the wind with XLAB's Super Wing SMP Rear Carrier designed specifically for Selle SMP and Phenom saddles. This versatile aero add-on delivers options galore. You can easily attach what you need for any length ride. A small seat bag fits inside the carrier, bottle cages attach on the outside and tubes can go underneath (accessories sold separately). The possibilities are endless. You also have 12 different mounting options so you can place your bottles just where you want them. Also, the Super Wing is made of light, tough aluminum so there's no twisting under load, no swaying while riding and no bouncing or losing bottles over bumps.
XLAB's Sonic Wing Dual Bottle Rear Carrier fits perfectly in seatposts with 2 6mm holes and lets you carry your gear behind you tucked out of the wind. This versatile carrier gives you options galore so you can easily attach what you need for any length ride. You also have 30 different mounting options and can keep it upright for low drag or invert it for easy access. And, since it attaches to the seatpost, the Sonic Wing works with most seats too. Its aluminum construction means there's no twisting under load, no swaying while riding and no bouncing or lost bottles over bumps. Compatible with Cervelo seatposts with two 6mm holes as well as the new QR PR6.
CamelBak has bottled the perfect hydration solution—the eddy Insulated .6L bottle's easy-sipping Big Bite Valve is simple, effective and won't spill if left open. An integrated handle makes it a cinch to carry the Bottle with a finger or clip it to a carabiner. The articulated stem allows the Bite Valve to flip flush with the bottle to keep it clean. Like all of CamelBak's bottles, it's 100% BPA free.
Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.
CamelBak's streamlined HydroBak carries 50 ounces of fluid—the equivalent of two large water bottles. The over-the-shoulder hose provides easy access to liquid refreshment and the breathable mesh harness keeps you feeling great. The HydroBak is compact and has a low profile, keeping it stable and out of the way. Plus, it has an external zip pocket for keys and other essentials.
Keep your Fresh Reservoir Filter running strong with CamelBak's Replacement Filters. They conveniently plug into the Fresh Reservoir Filter so you can continue to enjoy crisp, taste-free water. And, you get up to 120 liters of filtration out of every filter.
The Antidote Insulated Tube upgrades any CamelBak system to handle extreme winter and summer conditions. It includes: a Big Bite Valve mouthpiece, a Quick Link connector, an insulated tube cover and PureFlow delivery tube.
CamelBak's HydroLink Filter Adapter enables you to refill your reservoir through the drinking tube. Attach the HydroLink between the hose and your water filter (sold separately) and you are ready to replenish your water supply.
CamelBak's Fresh Reservoir Filter gets rid of bad taste with every sip. Its fast filtration speed means it won't impact flow rate, so you'll continually sip, or chug, crisp water. It easily clicks into any CamelBak bladder with the Quick Link system like the Antidote, or if you're using the Omega bladder, use the conversion kit (sold separately). And, you'll get up to 120 liters of filtration out of every Fresh Reservoir Filter.